5V Two data
-
WS2813 RGBW Addressable LED Components Chip SMD5050
WS2813 5050 RGBW LED chip is an intelligent control LED light source that the control circuit and RGBW chip are integrated in a package of 5050 components. Its internal include intelligent digital port data latch and signal reshaping amplification drive circuit. Also include a precision internal oscillator and a DC5V voltage programmable constant current control part, which achieves highly consistent color effect.
-
5V 12V 24V Individually Pixel LED Chip 5050 3535 2020 1515 White CCT RGB RGBW
Individually Pixel LED Chip
DC5V
DC12V
DC24V
White
RGB
RGBW
CCT
-
Black HD8808 WS2815 WS2813 2121 pixel rgb led chips data back up
1, The control circuit and RGB chip are integrated in a 2121 components, to form an external control pixel.
2, 5V WS2813 / 12V WS2815 DC power supply, can effectively reduce the operating current of the pixel LED, and decrease the voltage-drop of the PCB, this is to advance the consistency of the mixed lights for long-distance transmission.
3, Using the built-in signal reshaping circuit to achieve the signal waveform shaping, and no distortion of waveform ofsignal takes place.
4, The gray levels of each pixel are of 256 levels, which achieves “256*256*256=16777216” full-color display, and the refresh frequency reaches to 2KHz.
5, Serial cascade interface, data receiving and decoding depend on just one signal line.
6, Dual-signal wires version, signal break-point continuous transmission.
7, Any two point the distance more than 5M transmission signal without any increase circuit.
8, When the refresh rate is 30fps, cascade numbers is at least 1024 pixels.
9, Data transmitting at speeds of up to 800Kbps.
10, Good color consistency reliability, high cost-effective. -
HD8813 WS2813 Pixel LED Chip SMD5050
HD8813 WS2813 and LC8813 LEDs are pin to pin function,same lighting effect,same control way. HD8813 is an intelligent externally controlled LED that integrates a control circuit and a light-emitting circuit. DC5Vaddressable, and each LED is a pixel. The LED contains an intelligent digital interface data latch signal circuit. , Power supply voltage regulator circuit, built-in constant current circuit, data regeneration circuit, high precision RC oscillator, output drive adopts patented PWM technology, which effectively guarantees the color consistency of the each pixel,and the default output constant current value OUTR/OUTG/OUTB is 12MA.