12V Two data
-
HD8808B-3535 LED Chip compatible with WS2815 NS8808 3535
(1) Smart 3535 SMD integrates high-quality external control double-wire serial cascaded constant current IC, but DC12V one led 1pixel addressable, compatible with GS8208, same function with GS8208/WS2815 LED.
(2) The ability to automatically cross the dead pixels, a single point damage does not affect the data transmission and the normal operation of other points.
(3) The default output constant current value OUTR/OUTG/OUTB is 9MA.
(4) Built-in data shaping circuit, a pixel signal is received after wave shaping and output waveform distortion will not guarantee a line.
(5) Built-in power-on reset and power-down reset circuits, the light does not light up after power-on.
(6) Double-wire data transmission, unlimited cascading, data sending rate 800Kbps synchronous refresh.
-
HD8808 WS2815 5050 pixel rgb led chip 12V individual addressable leds
1, The control circuit and RGB chip are integrated in a 5050 components, to form an external control pixel.
2, 12V DC power supply, can effectively reduce the operating current of the pixel LED, and decrease the voltage-drop of the PCB, this is to advance the consistency of the mixed lights for long-distance transmission.
3, Using the built-in signal reshaping circuit to achieve the signal waveform shaping, and no distortion of waveform ofsignal takes place.
4, The gray levels of each pixel are of 256 levels, which achieves “256*256*256=16777216” full-color display, and the refresh frequency reaches to 2KHz.
5, Serial cascade interface, data receiving and decoding depend on just one signal line.
6, Dual-signal wires version, signal break-point continuous transmission.
7, Any two point the distance more than 5M transmission signal without any increase circuit.
8, When the refresh rate is 30fps, cascade numbers is at least 1024 pixels.
9, Data transmitting at speeds of up to 800Kbps.
10, Good color consistency reliability, high cost-effective. -
5V 12V 24V Individually Pixel LED Chip 5050 3535 2020 1515 White CCT RGB RGBW
Individually Pixel LED Chip
DC5V
DC12V
DC24V
White
RGB
RGBW
CCT
-
Black HD8808 WS2815 WS2813 2121 pixel rgb led chips data back up
1, The control circuit and RGB chip are integrated in a 2121 components, to form an external control pixel.
2, 5V WS2813 / 12V WS2815 DC power supply, can effectively reduce the operating current of the pixel LED, and decrease the voltage-drop of the PCB, this is to advance the consistency of the mixed lights for long-distance transmission.
3, Using the built-in signal reshaping circuit to achieve the signal waveform shaping, and no distortion of waveform ofsignal takes place.
4, The gray levels of each pixel are of 256 levels, which achieves “256*256*256=16777216” full-color display, and the refresh frequency reaches to 2KHz.
5, Serial cascade interface, data receiving and decoding depend on just one signal line.
6, Dual-signal wires version, signal break-point continuous transmission.
7, Any two point the distance more than 5M transmission signal without any increase circuit.
8, When the refresh rate is 30fps, cascade numbers is at least 1024 pixels.
9, Data transmitting at speeds of up to 800Kbps.
10, Good color consistency reliability, high cost-effective. -
12V HD105 RGBW individually LED Chip Pixel IC driver SMD5050 WS2815 digital rgbw components two data cable
HD105 rgbw leds
12v individually two data cable
RGBW= RGB + White(3000k/4000k/6000k)
LED source :5050SMD RGBW/WW/WWA built-in HD105 IC, same protocol with ws2815, but higher brightness and PWM.
We Hida is the only one factory who can make DC12V HD105 RGBW LED chip