Products
-
HD8806 WS2818 Pixel LED Strips
HD8806 and WS2818 IC driver have the same function, pin to pin use same PCB design for 5-24V digital led strip.Non built-in IC HD8806/WS2818 led strip has stable quality and widely used on LED Project. Our DC24v digital led strip, each 6 LEDS a pixel/set and cuttable. HD8806 IC one data cable, one date back up, two power lines,256 gray scale programmable with the controller,you can achieve monochrome gradient ,water, horse racing, text numbers chase, English ,pictures animations, video any effects and so on.
HD8806 is external IC components, if need built-in type, please check HD8808.
-
HD8812 SK6812 5050 RGBW LED Strip
SK6812 RGBW LED Strip and HD8812B RGBW LED Strip are same fpcb same function, because the SK6812RGBW and HD8812RGBW LED are pin to pin function,using same pcb design, same lighting effect, same control way. but HD8812 RGBW LED has high CRI>90, and the cct of white color has 3 choice: warm white 2700-3200k, nature white 3800-4500k, cool white 5700-6500k. One led 1 pixel addressable and cuttable.
Can be 30/36/48/60/72/96/120/144LEDS/m.
-
TM1809 IC Componenets 5v/12v rgb led strip 24bits
This pixel protocol was designed by Titan Micro Electronics in China. TM1809 is equipped with all the same features as its previous version, TM1803, but supports 3 RGB pixels off the one chip. The control circuit comes in a SOP14 package, allowing for more flexibility with LED choice.
TM1809 is a special IC with 9 channels(3R+3G+3B), so 1 IC chip can control 3 SMD5050 RGB lamps, and each lamp is individually controllable. This type stripe support both DC5v and 12V.
-
HD8812 SK6812 RGBW Pixel LED Chip
HD8812 RGBW is same with SK6812RGBW LED, it is 4 channels rgbw 4-in-1 digital led chip, It has 4 color chips inside the each led,Red,Green,Blue and “W” color chips. The “W” color cct can be CRI>90 warm white, nature white and cool white, even can be the Yellow or Amber color chips for different options,The RGBW pixel led can be the spi controller control and make your own program for it,also can be dmx controller control with the dmx decoder, or controlled with the artnet controller and work with the software as the madrix, MadMapper,single chip micro computer, Arduino or Raspberry Pi and so on. some factory named ws2812b rgbw, apa109 rgbw, lc8812 rgbw.
-
HD8812 SK6812 5050 Digital LED Chip with capacitor inside
HD8812 SK6812 5050 Digital LED Chip with capacitor inside it is same protocol with sk6812, just add one piece capacitor inside of LEDs, can work more stable, it is same function with addressable pixel 5050 sk6812/ws2812b/lc8812/apa104/apa105/apa109 led, use same pcb design, pin to pin function and same control way. The LED contains an intelligent digital interface data latch signal circuit.Power supply voltage regulator circuit, built-in constant current circuit, data regeneration circuit, high precision RC oscillator, output drive adopts patented PWM technology, which effectively guarantees the color consistency of the each pixel,and the default output constant current value OUTR/OUTG/OUTB is 12MA.
-
HD8808 WS2815 5050 pixel rgb led chip 12V individual addressable
1, The control circuit and RGB chip are integrated in a 5050 components, to form an external control pixel.
2, 12V DC power supply, can effectively reduce the operating current of the pixel LED, and decrease the voltage-drop of the PCB, this is to advance the consistency of the mixed lights for long-distance transmission.
3, Using the built-in signal reshaping circuit to achieve the signal waveform shaping, and no distortion of waveform ofsignal takes place.
4, The gray levels of each pixel are of 256 levels, which achieves “256*256*256=16777216” full-color display, and the refresh frequency reaches to 2KHz.
5, Serial cascade interface, data receiving and decoding depend on just one signal line.
6, Dual-signal wires version, signal break-point continuous transmission.
7, Any two point the distance more than 5M transmission signal without any increase circuit.
8, When the refresh rate is 30fps, cascade numbers is at least 1024 pixels.
9, Data transmitting at speeds of up to 800Kbps.
10, Good color consistency reliability, high cost-effective. -
HD107S 3535 Micro pixel LED Chip
(1) HD107S Smart 3535 SMD integrates high-quality external control double-wire serial cascaded constant current IC, compatible with SK9822/APA102, BUT MUCH BETTER, same control way. some factory indicate it as APA102, or say it is upgrade of sk9822, or named LC8823/NS107S.
(2) Complete external control pixel, make the color mix uniformity and consistency.The default output constant current value OUTR/OUTG/OUTB is 17MA.
(3) Built-in power-on reset and power-down reset circuits, the light does not light up after power-on.
(4) Two-wire data transmission, unlimited cascading, the maximum serial input data frequency is 40MHz.
(5) No data input, zero power consumption when the light is off.
(6) The PWM refresh frequency is 27KHz.
-
HD8812 SK6812 WS2812B 5050 Pixel LED Chip Black and White
HD8812 5050 Pixel LED is an intelligent externally controlled LED that integrates a control circuit and a light-emitting circuit. Its appearance is the same as a 5050 LED . Each LED is a pixel, it is same function with addressable pixel 5050 sk6812/ws2812b/lc8812/apa104/apa105/apa109 led, use same pcb design, pin to pin function and same control way. The LED contains an intelligent digital interface data latch signal circuit.Power supply voltage regulator circuit, built-in constant current circuit, data regeneration circuit, high precision RC oscillator, output drive adopts patented PWM technology, which effectively guarantees the color consistency of the each pixel,and the default output constant current value OUTR/OUTG/OUTB is 12MA.
-
TM1934 60leds DC12V 20pixels/m RGB Pixel LED Strips
TM1934 is Dual-Signal. Signal break-point continuous transmission. If one pixel is damaged, the following LEDs still work .Static effect, Chasing effect, special effect etc .Comes with backup data.
Differences between WS2813, WS2815 and TM1934. TM1934: DC12V/24V One IC drives 3 LEDs. WS2813: DC5V One IC drives 1 LED. WS2815: DC12V One IC drives 1 LED. Similarities:4 pin .Dual-Signal. 5050SMD .RGB IC Chip.
-
External GS8202 IC Componenets
This pixel protocol was designed by Genesis-Systech in China. The control circuit comes in a SOP8 package, allowing for more flexibility with LED choice.
When configuring your pixel device, select ‘GS8208′ as your Pixel Type. This is the equivalent protocol that will allow you to use GS8202 pixels
-
5050 RGBWW LED RGBCCT
(1) Ideal for 5050 RGBWW/RGBCCT LED lighting application to avoid multi-shadows.
(2) Higher heat conductivity for better thermal management.
(3) Provide variable and innovative array LED layout designs and combinations.
(4) Reduce the initial development cost and time.
(5) Lead free reflow solder compatible with RoHS compliant.
-
3528 RGB LED
(1) 6pin 3528 RGB LED provides the leading Chip on Top SMD type of LED technology.
(2) lighting solutions. It offers excellent uniformity, flexibility and cost efficiency along with compact size and wide range.
(3) of color selections. All components are produced by packing high-performance LED chips and silicon resin with proprietary phosphors.